Contact

Mezzanine Safety Gates

Mezzanine Safety Gates - Pallet Drop Gates - OSHA and ANSI Pallet Drop Compliance

It’s 100% Mezzanine Safety Gates Fall Protection! Finally you can have a mezzanine safety gate system that is always in the “protect” mode because one gate is always down. The LedgeGuard Mezzanine Safety Gates secret is that as one gate closes the other gate lifts so it’s protecting workers on your mezzanine 100% of the time. No need to remember to shut the gate – it just happens automatically. LedgeGuard gates makes mezzanine safety a snap.

1 Item(s)

per page

List  Grid 

Set Descending Direction
  1. Vertical lift safety gate allows your forklift safe access to the mezzanine without having to remove your fall protection.

    Mezzanine Safety Gate - Vertical Lift - Dual Gate - OSHA and ANSI Compliant

    Industrial Mezzanine Safety Gate that exceeds OSHA and ANSI regulations protecting your workers from falls. Dual Gate System - One gate closes the other gate lifts.

    Our LedgeGuard Vertical Lift Mezzanine Safety Gate exceeds OSHA and ANSI regulations and protects your workers from falls and protect mezzanine and pallet drop areas.

    Learn More

1 Item(s)

per page

List  Grid 

Set Descending Direction

Leading Edge Mezzanine Safety Gate Fall Protection Is Very Important.

Mezzanine Safety Gates - Often mezzanines are very busy areas with forklifts, pallet trucks, and personnel constantly moving in and around these areas. You need secure protection for these areas and LedgeGuard Vertical Lift Mezzanine Safety Gate kits are the perfect industrial safety gate answer. They offer absolute security at material loading / unloading points. Opposing safety gates allow the outer gate to be open to receive goods while the inner gate remains closed to protect personnel.

Mezzanine safety gates are required on all job sites by OSHA and ANSI regulations.  To successfully complete a multi-floor project, mezzanine deliveries of supplies and personnel are needed all day long.  With the wrong type of gate, much time can be lost due to opening and closing the sides of the gate to insure safety is complied with.   More to the point, if a gate is  not properly closed, the building contractor and his employees are open to falling from the mezzanine.   These types of accidents can cause severe injury or death and are clearly not safety violations that any contractor wants to have to face.

Mezzanine Safety Gates by TC Safety Supply

Clearly, as a contractor it is worth your while to install the best safety gates available.  Here at TC Safety Supply, we offer products that exceed the requirements of OSHA and ANSI regulations, yet are reasonably priced.  Our mezzanine safety gate is a great example of our safety on the job beliefs.  The gate opens and closes on two sides.  This is routine with mezzanine safety gates, to offer safety to workers on the side not being used to move supplies or persons during the work day.   However, most gates require workers to stop and close the gate on the other side, and then again when the load or people have safely arrived.  If for some reason the gate is not closed even once, it could lead to a major disaster at the work place.

To solve this issue, our mezzanine safety gates are self-closing.  When gates are operating during the work day, one side or the other is open to allow movement of supplies and personnel.  Our gates are designed to automatically close the gate on the other side.  Your employees no longer need to worry about closing any gates at all.    As one side is opened by the staff,  the other side will close on its own.  Our gate always has one gate closed or in the process of closing.  Opening the other gate always stimulates the opposite gate to close.  What could be safer for your employees than this?

Of course,  our safety gates are designed so that both gates can be closed when the mezzanine area is not in use.  This is often used as a signal to the workers that this area is not in use at this time.  Otherwise, our safety gate provides smooth, continuous openings and closings that increase the time your employees can spend on your projects.  Five minutes  a number of times per shift can add an hour or more of actual work time.

TC Safety Supply is Minnesota's leader in fall protection and mezzanine safety gates. Mezzanine safety gates are the perfect safety devices for all the mezzanines that are part of your work areas. Browse TC Safety Supply's website to find the best choices in mezzanine safety gate supplies!